Lynx NGT-9000 Pilot's Guide

Lynx
®
NGT-9000
Pilot’s Guide 2-63
Operation - Panel Mount
TAWS Display Alerts
When a TAWS Caution or Warning Alert is detected, the appropriate
alert symbol is depicted at the location of the alert on the terrain map.
Red or Amber Alert Text indicators which relate to the active TAWS
Alert are shown at the bottom center of the screen. Refer to Figure
2-28 and Table 2-7. The display alert is accompanied by an aural
announcement.
The TAWS Inhibited indicator is shown when Alerting is inhibited using
the TAWS options Screen.
Figure 2-29: TAWS Options Screen
TAWS Options Button
The gear shaped Options Button is located in the upper right corner
of the right application screen. Tap the button to open the options
screen. Refer to Figure 2-29.
TAWS Options Screen
The Settings latch button opens a screen providing the setting of
Obstacles and Alerting status. Both buttons may be set to “Enabled”
or “Inhibited”. Both buttons are set to “Enabled at start-up.
• Selecting “Inhibited” on the Obstacles button removes obstacles
from the TAWS display and TAWS will not include obstacles as
part of the alert detection. This is used to stop TAWS alerting when
landing at an unknown airport or runway.
• Selecting “Inhibited” on the Alerting button places an “Inhibited”
indicator on the screen and removes visual TAWS alerts and stops
aural alerts from occurring.
Tap the Done button to close the Options Screen.

Lynx NGT-9000 Specifications

General

Brand	Lynx
Model	NGT-9000
Category	Security System
Language	English