MacDon A40D - Page 4

Summary of Changes
At MacDon, we’re continuously making improvements, and occasionally these improvements affect product
documentation. The following list provides an account of major changes from the previous version of this document.
Section
Summary of Change
Internal Use
Only
Introduction, page i Added shortage and damages email contacts. Technical
Publications
Introduction, page i Added 30 Nm torque spec to be listed two ways. Technical
Publications
1.1 Safety Alert Symbols, page 1 Added Safety Alert Symbols topic.
Technical
Publications
1.4 Operational Safety, page 5 Added Operational Safety topic.
Technical
Publications
1.5 Hydraulic Safety, page 6 Added Hydraulic Safety topic.
Technical
Publications
3.18 Attaching A40DX Auger Header, page
77
Added topic. Technical
Publications
3.19 Connecting A40DX Auger Header
Hydraulic and Electrical Systems, page 85
Added topic. Technical
Publications
5.6.1 Checking Float – M2 Series
Windrowers, page 102
Added topic. Technical
Publications
5.6.2 Setting Float – M2 Series Windrowers,
page 103
Added topic. Technical
Publications
5.6.3 Removing and Restoring Float – M2
Series Windrowers, page 104
Added topic. Technical
Publications
5.6.4 Setting Float Options with Fixed Deck –
M2 Series Windrowers, page 105
Added topic.
Technical
Publications
5.14.1 Calibrating Knife Drive, page 119
Added topic. Technical
Publications
5.14.2 Calibrating Knife Drive on
HarvestTouch
™
Display, page 121
Added topic. Technical
Publications
Recommended Fluids and Lubricants, page
Added topic.
Technical
Publications
Recommended Fluids and Lubricants, page Updated the quantity of the knife drive box lubricant
from 2.2 liters to 2.1 liters.
ECN 63317
262335 ii Revision A