262335 76 Revision A
3.17 Hydraulic Drive Hose Routing – M1 Series Windrowers
IMPORTANT:
Only A40DX and A40DX GSS headers are factory-configured for operation with M1and M2 Series Windrowers.
IMPORTANT:
If attempting to attach an A40D Header to an M1170 or M1240 Windrower, the M1 Series Conversion kit (B5998) or the
A40D SP Grass Seed Auger Conversion kit (B6384) must first be installed. These kits include a new manifold and hydraulic
hose bundle required for operation with an M1 Series Windrower, and effectively convert an A40D header into an A40DX
header.
IMPORTANT:
The Reel Speed Control kit (B6604) is standard on A40DX GSS headers starting in model year 2019. This kit can be ordered
separately for A40DX GSS headers prior to model year 2019, and for A40DX headers.
A40DX and A40DX GSS hose routing does NOT require adjustment. Proceed to 3.20 Repositioning Knife Drive Box
Breathers, page 88.
ASSEMBLING THE MACHINE
To Next Page
Loading...
