What to do if there is a foreign object between the rolls of MacDon Farm Equipment?
If you find a foreign object between the rolls, disengage the header and stop the engine. Make sure all moving parts have completely stopped before you attempt to remove the object.
What to do if there is mud on the MacDon Farm Equipment cutterbar?
If there is mud on the cutterbar, remove it immediately. Do NOT allow the mud to dry on the cutterbar.
What to do if the MacDon Farm Equipment disc is not turning?
If the disc is not turning, replace the spindle shear pin.
What to do if my MacDon Farm Equipment conditioner drive belt is slipping?
If the conditioner drive belt is slipping, adjust the conditioner drive belt tension.
What to do if my MacDon Farm Equipment has broken, bent, or dull blades?
If the blades are broken, bent, or dull, replace them or turn them over.
What to do if my MacDon Farm Equipment has bent discblade?
If a discblade is bent, replace it.
What to do if there are mud deposits on the MacDon Farm Equipment conditioner rolls?
If there are mud deposits on the conditioner rolls, clean the rolls.
What to do if the MacDon Farm Equipment spindle bearing fails?
If the spindle bearing fails, replace the spindle bearing.
What to do if there is a foreign object on the MacDon Farm Equipment cutterbar?
If there's a foreign object on the cutterbar, disengage the header and stop the engine. Ensure all moving parts have completely stopped before removing the object.
What to do if there is material wrapped around the MacDon Farm Equipment spindle?
If there is material wrapped around the spindle, remove the disc and then remove the material.
General| Brand | MacDon |
|---|---|
| Model | R216 SP |
| Category | Farm Equipment |
| Language | English |
Explains the universal symbol indicating important safety messages.
Defines DANGER, WARNING, CAUTION, IMPORTANT, and NOTE signal words used in manual.
Lists the technical specifications and dimensions of the R216 SP Rotary Disc Header.
Instructions for the initial operation and break-in of the new header.
Daily checks to ensure the machine is ready for operation.
Procedures for safely engaging and disengaging header lift cylinder safety props.
Step-by-step guide for attaching the R216 SP header to the M1240 windrower.
Procedures for safely detaching the header from the windrower.
Details how to adjust header settings for optimal crop cutting performance.
Covers maintenance of the cutterbar discs, spindles, blades, accelerators, rock guards, and drums.
Lists common performance issues and their solutions for the header.
Addresses mechanical issues like noise, vibration, and component wear with solutions.
To Next Page
