18.5 Error code list 149
-2109 DMR_EXPORTED_SYM←-
BOL_NOT_FOUND
One or more symbols
needed in a detected driver
library couldn't be resolved.
In most cases this is an er-
ror handled internally. So the
user will not receive this er-
ror code as a result of a call
to an API function. How-
ever when the user tries to
get access to an IMPACT
buffer type while the needed
IMPACT Base libraries are
not installed on the target
system this error code also
might be returned to the
user.[-2109]
-2110 DEV_UNKNOWN_ERROR An unknown error occurred
while processing a user
called driver function.
[-2110]
-2111 DEV_HANDLE_INVALID A driver function has been
called with an invalid device
handle.
[-2111]
-2112 DEV_INPUT_PARAM_IN←-
VALID
A driver function has been
called but one or more of the
input parameters are invalid.
There are several possi-
ble reasons for this error←-
: an unassigned pointer has
been passed to a function,
that requires a valid point-
erone or more of the passed
parameters are of an incor-
rect typeone or more pa-
rameters contain an invalid
value (e.g. a filename that
points to a file that can't be
found, a value, that is larger
or smaller than the allowed
values. [-2112]
-2113 DEV_WRONG_INPUT_P←-
ARAM_COUNT
A function has been called
with an invalid number of in-
put parameters.
[-2113]
-2114 DEV_CREATE_SETTING←-
_FAILED
The creation of a setting
failed.
This can either happen,
when a setting with the same
name as the one the user
tried to create already ex-
ists or if the system can't al-
locate memory for the new
setting.[-2114]
MATRIX VISION GmbH
To Next Page
Loading...