Matrix Vision mvBlueFOX3 - 12 Application Usage; Wxpropview; How to Work with Wxpropview

To Next Page

To Previous Page

74 CONTENTS

12 Application Usage

12.1 wxPropView

wxPropView (p. 74) is an interactive GUI tool to acquire images and to conﬁgure the device and to display and

modify the device properties of MATRIX VISION GmbH hardware. After the installation you can ﬁnd wxPropView

(p. 74)

• as an icon with the name "wxPropView" on the desktop (Windows) or

• in "∼/mvimpact-acquire/apps/mvPropView/x86" (Linux).

wxPropView - Introduction:

https://www.matrix-vision.com/tl_files/mv11/trainings/wxPropView/wx←-

PropView_Introduction/index.html

12.1.1 How to work with wxPropView

wxPropView - Working with wxPropView:

https://www.matrix-vision.com/tl_files/mv11/trainings/wxPropView/wx←-

PropView_WorkingWith/index.html

Depending on the driver version, wxPropView starts with the Quick Setup Wizard (p. 74) (as soon as a camera

with the right ﬁrmware version was selected used or a single camera with the right ﬁrmware was found) or without

it (p. 77).

12.1.1.1 Quick Setup Wizard

MATRIX VISION GmbH