Matrix Vision mvBlueFOX3 - Working with the Userfile Section (Flash Memory)

268 CONTENTS
20.8.3 Working with the UserFile section (Flash memory)
The mvBlueFOX3offers a 64 KByte section in the Flash memory that can be used to upload a custom file to (User←-
File).
To read or write this file you can use the following GenICam File Access Control (p. 119) and its interfaces:
• IDevFileStream (read)
• ODevFileStream (write)
Attention
The UserFile is lost each time a firmware update is applied to the device.
20.8.3.1 Using wxPropView
wxPropView (p. 74) offers a wizard for the File Access Control (p. 119) usage:
1. Click on "Setting -> Base -> Camera -> GenICam -> File Access Control -> File Selector -> File Operator
Selector".
Now, the "Wizard" button becomes active.
MATRIX VISION GmbH