4 Revisions 13
24. June 2016 V1.24 LAN Updated use case Creating
acquisition sequences (Se-
quencer Control) (p. 169).
Firmware:
21. June 2016 V1.23 LAN Added use case Triggering of
an indefinite sequence with
precise starting time (p. 241).
Firmware:
17. June 2016 V1.22 LAN Added sensor IMX264: mv←-
BlueFOX3-2051a (5.1 Mpix
[2464 x 2056]) (p. 307) .
Added use case Synchronizing
camera timestamps without
IEEE 1588 (p. 273).
Firmware:
12. May 2016 V1.21 LAN Added sensor IMX255: mv←-
BlueFOX3-2089 (8.9 Mpix
[4112 x 2176]) (p. 315) .
Added warning in Adjusting
the C-mount (mvBlueFOX3-
2xxx-1xxx) (p. 22).
Firmware:
21. April 2016 V1.20 LAN Added sensor IMX253: mv←-
BlueFOX3-2124 (12.4 Mpix
[4112 x 3008]) (p. 322).
Firmware: 2.8.241.0
21. January 2016 V1.19 LAN Added sensor IMX265: mv←-
BlueFOX3-2032a (3.2 Mpix
[2064 x 1544]) (p. 299).
Firmware: 2.6.180.0
02. December 2015 V1.18 LAN Updated CE declarations
(p. 23).
30. November 2015 V1.17 LAN Added Minimizing sensor pat-
tern of mvBlueFOX3-1100G
(p. 225).
Firmware: 2.3.70.0
12. November 2015 V1.16 LAN Added mvBlueFOX3-M2 infor-
mation (p. 58).
09. November 2015 V1.15 LAN Added sensor IMX252: mv←-
BlueFOX3-2032 (3.2 Mpix
[2064 x 1544]) (p. 296).
27. October 2015 V1.14 LAN Added Command-line options
(p. 99).
22. October 2015 V1.13 LAN Added sensor IMX250: mv←-
BlueFOX3-2051 (5.1 Mpix
[2464 x 2056]) (p. 303).
21. September 2015 V1.12 LAN Added power led states of Stan-
dard model -2xxx (p. 63).
07. September 2015 V1.11 LAN Changed sensor size of 10
Mpixels resolution CMOS sen-
sor (-x100) (p. 67) from 1/2.35"
to 1/2.3".
11. August 2015 V1.10 LAN Added image "Input switching
times" in Electrical character-
istics (p. 60).
04. August 2015 V1.09 LAN Added Windows 10 support.
31. July 2015 V1.08 LAN Added dimensional drawing of
mvBlueFOX3-IO NC (p. 56).
Added USB performance im-
provements For Odroid-U2 / -←-
U3 Users (p. 47) and For Rasp-
berry Pi Users (p. 47).
MATRIX VISION GmbH
To Next Page
Loading...