Matrix Vision mvBlueFOX3 - Page 27

16 CONTENTS
26. September 2014 V0.37b LAN Restructured sensor informa-
tion.
23. August 2014 V0.36b LAN Removed ext. power supply in
Components (p. 63).
21. August 2014 V0.35b LAN Added use case Using the
standby mode (p. 275).
18. August 2014 V0.34b LAN Updated Sensor overview
(p. 64).
17. July 2014 V0.33b LAN Added use case Introducing
LUTs (p. 255).
09. July 2014 V0.32b LAN Added cable color scheme
in Circular connector male
(Power / Digital I/O) (p. 59).
04. July 2014 V0.31b LAN Board-level model is called
mvBlueFOX3-M now.
11. June 2014 V0.30b LAN Added daylight cut filter
(p. 72).
05. June 2014 V0.29b LAN Update chapter Using the
linescan mode (p. 187).
02. June 2014 V0.28b LAN Removed global reset release
mode from mvBlueFOX3-1031
(3.2 Mpix [2048 x 1536])
(p. 345).
27. May 2014 V0.27b LAN Added use case Reducing
noise by frame averaging
(p. 216).
13. May 2014 V0.26b LAN Corrected images in Charac-
teristics of the digital inputs
(p. 60) and Characteristics of
the digital outputs (p. 61).
09. May 2014 V0.25b LAN Added Model without housing
(-M1) (p. 56).
21. Mar. 2014 V0.24b LAN Changed sensor MT9M021
to MT9M031: mvBlueFOX3-
1012b (1.2 Mpix [1280 x 960])
(p. 331).
14. Mar. 2014 V0.23b LAN Added Windows 8 and 8.1 as
supported operating systems in
Quickstart (p. 35).
10. Mar. 2014 V0.22b LAN mvDeviceConfigure (p. 100)
extended.
25 Feb. 2014 V0.21b LAN Corrected Ordering code sam-
ples (p. 33).
12 Feb. 2014 V0.20b LAN Updated trigger modes of the
sensors.
07 Feb. 2014 V0.19b LAN Added description of sensor
mvBlueFOX3-1031 (3.2 Mpix
[2048 x 1536]) (p. 345).
31 Jan. 2014 V0.18b LAN Changed position of chapter "←-
First Start" and renamed it to
Quickstart (p. 35).
MATRIX VISION GmbH