McLaughlin VX30 Series - Preparing the Machine for Operation; Engine Fluids Level Check Procedures

40-14 Preparing Machine and Work Area VX30/VX50 Gen3/ECO50 Vacuum Excavators
PREPARE THE MACHINE
Engine Fluids - Check
Check engine crankcase oil level at dipstick (1).
NOTICE: Engine
is equipped with an oil pressure sensing switch. When oil pressure
decreases below an acceptable level, the engine will significantly slow down or shut
off.
WARNING: Check machine before operating. Machine must be in good operating condition and
all safety equipment installed and functioning properly.
DANGER: Crushing weight. Rolling or tilting trailer will cause death or serious injury.
Chock tires and apply parking brake before operat
ing or servicing. Do not operate unless
attached to the towing vehicle.
1