60-42 Maintenance - 500 Service Hours VX30/VX50 Gen3/ECO50 Vacuum Systems
Blower Oil - Change
(1) Oil Fill Port
Fill at each breather port to middle of sight glass (2)
. Fill each gear end
separately. Do not fill past middle of each sight glass. Watch for leaks.
(2) Oil Sigh
t Glass
(3) Oil D
rains
Change blower oil every 500 service
hours or twice yearly.
NOTICE: Cha
nge oil more frequently if oil quality deteriorates or operating
conditions are severe.
Refer to the Blower Operation Ma
nual supplied with the machine for instructions.
WARNING: Never attempt to change or add oil while blower is running. Personal injury or equipment
failure will result. Allow unit to cool down before attempting any maintenance.
To Next Page
Loading...
