VX30/VX50 Gen3/ECO50 Vacuum Systems Maintenance - 250 Service Hours 60-39
Step 4: Install
dirt plug.
Step 5: Remove bloc
king and jack.
Step 6: Repeat abo
ve steps for the other brakes.
Brake Controller (Optional) - Test/Adjust
Refer to manufacturer’s procedures to test and adjust the brake controller. If your towing vehicle is already
equipped with an electric brake controller, it must be capable of automatic and manual brake application.
Do not use a brake controller that is purely manually operate
d. If your towing vehicle is equipped
with a manually operated controller, remove it and install one that can be applied both
automatically and manually.
When the controller is properly adjusted,
there should be no sensation of the trailer pushing or pulling the
towing vehicle during a stop. Once this setting is reached, no further adjustment should be required.
This adjustment does not affect maximum br
aking capacity of the trailer brakes.
To Next Page
Loading...
