VX30/VX50 Gen3/ECO50 Vacuum Systems Maintenance - 100 Service Hours or Monthly 60-29
Blower Oil - Initial Change
(1) Oil Fill Ports
Fill at each breather port to middle of sight glass (2)
. Fill each gear end
separately. Do not fill past middle of each sight glass. Watch for leaks.
(2) Oil Sigh
t Glasses
(3) Oil Dr
ains
Change oil every 500 hours after initial oil
change. Refer to the Blower Operation
Manual supplied with the machine for instructions.
WARNING: Never attempt to change or add oil while blower is running. Personal injury or equipment
failure will result. Allow unit to cool down before attempting any maintenance.
To Next Page
Loading...
