60-2 Safety Signs - Maintain VX30/VX50 Gen3/ECO50 Vacuum Systems
Step 1: Turn Ignit
ion Keyswitch off. Follow Shutdown Procedure, page 23-1.
Step 2: Remove posit
ive (+) battery cable from battery post. Unplug all electrical connectors.
SAFETY SIGNS - MAINTAIN
Safety signs and decals located on your machine contain important and useful information that will help you
operate your equipment safely and correctly. Refer to “Safety Signs - Maintain,” page 60-31, for maintenance
information.
ENGINE MAINTENANCE
Refer to the Engine Operation Manual supplied with each machine for maintenance instructions not included in
this manual.
HOURMETER - CHECK FOR MAINTENANCE INTERVAL
The hourmeter on the power unit is designed to determine maintenance intervals for the machine. The
hourmeter indicates the total number of hours the engine has been in operation.
Maintenance intervals are based on normal o
perating conditions. When operating under severe conditions, the
maintenance intervals should be shortened.
MACHINE - GREASE
As a general rule, grease machine after it is shut down for the day. This protects metal under seals from
corrosion caused by condensation as temperature drops.
Ensure all fittings and nozzle of grease applicator are clean befor
e applying grease. If any grease fittings are
missing, replace them immediately.
To Next Page
Loading...