McLaughlin VX30 Series - Starting Procedure for Vacuum Excavator; Standard Engine Starting Steps

VX30/VX50 Gen3/ECO50 Vacuum Excavators Starting Procedure 22-1
Section 22: Starting Procedure
STARTING THE ENGINE
Step 1: Open Upper Gate/Inlet Valve (1).
Step 2: En
sure Reverse Flow Control Valve
(2) is in NEUTRAL position.
WARNING: Read Operator’s Manual and safety signs before operating machine.
WARNING: Entanglement hazard. Rotating pulleys and belts could cause serious
injury.
Do not operate without guards in place.
1
2