60-56 Maintenance - As Required VX30/VX50 Gen3/ECO50 Vacuum Systems
Towing Chain - Replace
Replace towing chain (1) if the chain has been dragged, kinked, or damaged.
Storage
Preparing for Storage
• Park machine on level ground and chock the
wheels. Use the jack to support the tongue. If possible, store
machine in a dry, protected place.
• Clean all mud, dirt, grease, and other foreign mate
rial from the machine. To inhibit rusting, repaint areas
with missing paint.
• Repair or replace any worn or damaged parts and decals. Refer to the Parts Manu
al for ordering replacements.
• Refer to the Engine Operation Manual supplied w
ith machine for engine storage instructions.
• Refer to the Blower Operation Manual suppli
ed with machine for blower storage instructions.
• Refer to the Pump Operation Man
ual supplied with machine for water pump storage instructions.
• Remove battery and store inside where
the temperature will not drop below 32°F (0°C). Check fluid level
and charge fully. Check battery every 30 days and charge if necessary.
• Lubricate all grease points on the machine.
• Do not subject units to excessive vibration
during storage.
• If stored outdoors, provide coverage s
uch as a tarpaulin or lean-to.
• Do not leave belts fully tensioned.
To Next Page
Loading...
