VX30/VX50 Gen3/ECO50 Vacuum Systems Maintenance - 50 Service Hours or Weekly 60-25
Machine Components - Check/Clean
• Clean water tank shutdown switch using low
pressure water to prevent float from sticking.
• Check water tanks for any foreign debris such as
sand o
r dirt. If present, use vacuum to remove.
• Wash out gate valve gates (1) to prevent da
mage
to gate. The gate is the plates inside the valve
that opens and closes using the valve handle.
• Clean blower filter (2) to
prevent dirt and debris
from entering the blower through relief. Replace
filter if worn or damaged.
To Next Page
Loading...
