VX30/VX50 Gen3/ECO50 Vacuum Excavators Preparing Machine and Work Area 40-17
Water Tank In-Line Strainer - Clean
Clean water strainer daily before starting the machine,
or during operation if water flow becomes restricted.
Step 1: Close Water Supply valve (1).
Step 2: Remove plug-and-cap fitting (2) from strainer
housing.
Step 3: Remove and clean screen (3) by
flushing with
water.
Step 4: In
stall screen, cap fitting, and plug.
Step 5: Open
Water Supply valve.
Vacuum Hoses and Tools - Check
Check all vacuum hoses and tools for blockages and damage. Ensure nozzles are clean, free of clogs, and work
properly. Replace nozzles as necessary. Check fittings and condition of hoses. Tighten or replace as necessary.
Replace broken and worn tools.
Filters - Check
Check all filters. Clean or replace filters as necessary.
MACHINE LOCATION
• Locate machine on a stable, level place.
• Position machine as close to the area to be excavated
as possible.
• Engage towing vehicle park
brake and chock wheels.
To Next Page
Loading...