60-52 Maintenance - As Required VX30/VX50 Gen3/ECO50 Vacuum Systems
Nozzles - Inspect/Clean/Replace
Inspect nozzles on all water tools. Replace damaged nozzles. Always replace a nozzle
with a nozzle of the same type and orifice size. Consult Parts Manual for replacement
part number.
(1) Nozzle
To inspect/clean/replace:
Step 1: Remove nozzl
e.
Step 2: Blow out
nozzle.
Step 3: Replace or reinstall nozzle
in each tool.
To Next Page
Loading...
