McLaughlin VX30 Series - Machine Components - Check;Maintain; Overall Machine - Check

60-30 Maintenance - 100 Service Hours or Monthly VX30/VX50 Gen3/ECO50 Vacuum Systems
Machine Components - Check/Maintain
• Inspect all suction hoses and air connection hoses for any signs of cracks. Replace damaged hoses.
• Inspect door seals for splits or cuts. Replace damaged seals.
Overall Machine - Check
Shields and Guards - Check that all shields and guards are installed and are fastened securely to the
machine. Replace or repair any shields or guards that are damaged or have missing parts.
Safety Signs - Check the machine for any wor
n or missing safety signs and operating decals.
Hardware - Check the machine f
or loose, worn, or missing parts and hardware. Tighten any loose parts and
replace any worn or missing parts (refer to the Parts Manual for replacement parts).
Frame - Check
frame and contact Vermeer or McLaughlin immediately if you notice any bends, cracks, or breaks.
Highway Lights - With li
ghts plugged into towing vehicle, check that the taillights and license plate light are
operating properly. Refer to “Lights - Replace,” pag
e 60-53.
Reflectors - Check that reflectors
are present. Replace missing or damaged reflective materials.