EasyManua.ls Logo

McLaughlin VX30 Series - Battery Jump-Starting Safety and Procedure

McLaughlin VX30 Series
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VX30/VX50 Gen3/ECO50 Vacuum Excavators Starting Procedure 22-3
JUMP-STARTING
Battery Explosion - Avoid
Do not jump-start or charge a battery that is frozen or low on electrolyte.
Avoid explosion hazard. If equipped with ba
ttery caps, they must be in place and tight to reduce risk of battery
explosion.
NOTICE: Use onl
y
a 12-volt system for jump-starting. Do not allow vehicle used to jump-start to be in contact
with the disabled machine. Vehicles in contact have a ground connection which allows a spark to occur at the
battery when the POSITIVE jumper cable is connected or removed. Use only approved jumper cables. Avoid
inadvertent contact between cables and surrounding components.
Battery Burns - Avoid
Battery contains sulfuric acid which can cause severe burns. Avoid contact with eyes, skin, and clothing.
In case of acid contact:
External: Flush with plenty of water. If eyes have been exposed, flush with water for 15 minutes and get
prompt medical attention.
Internal: Drink large quantities of water or milk, follow with milk of
magnesia, beaten egg, or vegetable oil.
Call a physician immediately.
WARNING: Battery fumes are flammable and can explode. Keep all burning materials away
from battery. Battery explosion can blind. Acid can blind and burn. Tools and cable clamps
can make sparks.
Do not smoke. Shield eyes and face. Read instructions.

Table of Contents

Related product manuals