McLaughlin VX30 Series - Maintenance Interval Chart Summary

60-4 Maintenance Interval Chart VX30/VX50 Gen3/ECO50 Vacuum Systems
MAINTENANCE INTERVAL CHART
Initial = Initial maintenance on new machine. Regular maintenance interval may be different.
=
Regular maintenance interval.
NOTICE: Severe service
operations can accelerate component wear. Factors for severe service include, but are
not limited to, dusty environments, high load factors and extended periods at low idle. Engines that operate
under severe conditions may need more frequent maintenance intervals in order to ensure maximum reliability
and retention of full service life.
Service
Maintenance Intervals - Service Hours
10 or
Daily
50 or
Weekly 100 200 250 400 500 600
Add’l.
Periodic
As
Req’d.
Brake System - Check 
Engine Oil Level - Check 
Engine Coolant Level - Check 
Engine Fan Belt - Check 
Fuel Tank - Fill 
Hydraulic Fluid Level - Check 
Machine - Clean and Inspect 
Pintle Hitch - Inspect 
Water Pump and Blower Oil Level - Check 
Tank Full Shutdown Switch - Check 
Vacuum Hoses and Water Hoses - Check 
Vacuum Air Filter - Check/Clean 
Water Tank In-Line Strainer - Clean 
Engine Oil & Oil Filter - Change/Replace Initial
Engine Fuel Pipes and Clamp Bands - Check 
Engine Fuel/Water Separator - Drain - V2403 