VX30/VX50 Gen3/ECO50 Vacuum Systems Maintenance - 100 Service Hours or Monthly 60-33
Amber Beacon - Check
Check that amber beacon flashes when engine ignition Keyswitch is on. If beacon does not function properly,
contact your Vermeer dealer.
Tires and Rims - Check
• Check tires and rims for damage.
• Check for loose or
missing lug nuts.
• Check tires for correct pressure. Refer to Specifications, page 70-1.
• Check lug nuts for tightness. Refer to Specifications, page 70-1.
• If the wheel has been removed, tighten lug nuts i
n the sequence shown. Re-torque after 50 and
then every 100 miles.
WARNING: Tire explosion can result if the following procedures are not performed:
• Maintain correct tire pressure. Do not inflate tire above recommended pressure.
• Low tire pressure can result in interna
l tire damage. Inflate to recommended
pressure.
• Replace any tire with cuts or bubbles. Replace any damaged rims.
• Do not weld or heat wheel assembly. Heating will increase tire pressure.