EasyManua.ls Logo

McLaughlin VX30 Series - Safety Messages and Warnings

McLaughlin VX30 Series
210 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
VX30/VX50 Gen3/ECO50 Vacuum Excavators Safety Messages 10-1
Section 10: Safety Messages
General safety messages appear in this Safety Messages section. Specific safety messages are located in
appropriate sections of the manual where a potential hazard may occur if the instructions or procedures are not
followed.
A signal word DAN
GER”, “WARNING”, or CAUTION is used with the safety alert symbol.
Safety signs with signal word DANGER”, “WAR
NING”, or CAUTION are located near specific hazards.
SAFETY SYMBOL EXPLANATION
DANGER
Indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING
Indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION
Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates information considered important, but not hazard-related.
This is the safety alert symbol. This
symbol is used in combination with an exclamation mark or
other symbols to alert you to the potential for death or serious injury.
This symbol indicates that at least one part of the machine is not operating c
orrectly. Shutting down
the machine may not be necessary, but some maintenance may be required.

Table of Contents

Related product manuals