McLaughlin VX30 Series - Specifications; Lubricants

VX30/VX50 Gen3/ECO50 Vacuum Systems Specifications 70-1
Section 70: Specifications
LUBRICANTS
Lubricant/Recommendation Capacity Specification/Notes
Engine Oil (with Filter) With filter: Engine must be level when checking engine
oil.
Kubota V1524B4-1VC1: API
Class
CJ-4
1.8 gal (6.7 L) SAE30, SAE10W-30 or SAE15W-40 - Above 77°F (25°C)
SAE10W30 or SAE15W-40 - 14 to 77°F (-10 to 25°C)
SAE 10W30 - Below 14°F (-10°C)
Kubota V2403-CR-E4B: API
Class
CJ-4
2.5 gal (9.5 L)
Electric/Hydraulic Power Pack Bucher Hydraulic Inc. 12V Elec
tric Hydraulic Power Pack
ATF Dexron II or equivalent 4.5 qt (4.3 L) Use caution not to get dirt or other contaminants into
system when servicing. Filter all fluid through a 10-micron
filter before adding.
0-120°F (-18-40°C) SAE 10 or ATF Dexron II
32-175°F (0-80°C) SAE 20
Blower Howden Roots Vac Pump 1025 LH Shaft
Roots Synthetic Oil, Mobil DTE BB,
Texa
co R&O 220, Amoco 220, or
equal non-detergent motor oil
28 oz (0.82 L) gear end;
15 oz (0.44 L) drive end
(approx.)
ISO 100 below 0°F (-18°C)
ISO 150 at 0 to 32°F (-18 to 0°C)
ISO 220 at 32° to 90°F (0 to 32°C)
ISO 320 above 90°F (32°C)
Water Pump General Pump TSF2021L
General Pump Series 100 oil or SAE
30
non-detergent motor oil
37.2 oz (1.1 L) SAE 30