VX30/VX50 Gen3/ECO50 Vacuum Excavators Electronic Controller 21-7
(12) DPF Regen Active/High Exhaust Temperature
Displays to show that a regeneration is active, and to indicate higher
than normal exhaust temperatures may exist due to DPF regeneration.
Indicator turns off when regeneration is complete. Refer to Safety
Messages, page 10-1, for associated warning.
(13) DPF Regen Needed
Displays when DPF regen is needed or manually initiated by the
operator.
(14) DPF Regen Inhibited
Displays when DPF regen has been inhibited (disabled) using Request
DPF Regen Inhibit Button. Auto DPF should not be inhibited unless
high exhaust temperature presents an immediate hazard.
(15) Engine Warning
When lit (yellow) along with engine malfunction indicator lamp (MIL),
indicates an engine warning/alert.
(16) Engine Shutdown
When lit (red) along with engine malfunction indicator lamp (MIL),
indicates that engine will be shut down. Action is required. Refer to
Engine Operation Manual for instructions.
To Next Page
Loading...
