VX30/VX50 Gen3/ECO50 Vacuum Excavators Transporting the Machine 30-13
Safety signs are located on fr
ont and rear of trailer.
Installation
Lift vacuum excavator into position using suitable lifting equipment. Securely bolt vacuum excavator skid to the
transport vehicle.
NOTICE: Lift vacuum excava
tor with tanks empty. Attempting to lift with tanks full may damage the mounting
cradle and require lifting equipment with larger capacity.
Locate vacuum excavator so the engine, controls, tools and spoil
tank can be safely and easily accessed by
workers. Provide steps or a ladder from the ground level to the bed of the truck or trailer.
WARNING: Not a lift point for equipment. Heavy load can fall and cause possible death
or serious injury.
Lift equipment at designated points. See equipment manual(s) for lift points.
WARNING: Before mounting on a truck or trailer, read the truck or trailer manual for safety
precautions and information. Do not cut or drill a
ny holes in the transport vehicle floor or frame
without consulting a manual for the specific transport vehicle. Take protective measures and use
caution when cutting or drilling around air and fuel tanks, hoses, and other nearby components.
To Next Page
Loading...
