MT7620 PROGRAMMING GUIDE
Integrated 802.11n MAC/BBP and 2.4 GHz RF/FEM Router-on-a-Chip
PPPoE Discovery Egress VLAN Tag Attribution
3’b000: System Default (Disable)
3’b001: Consistent
3’b010, 3’b011: Reserved
3’b100: Untagged
3’b101: Swap
3’b110: Tagged
3’b111: Stack
PPPoE Discovery Leaky VLAN Enable
1’b0: Disable
1’b1: Enable
PPPoE Discovery Force the Highest Priority
1’b0: System default
1’b1: Assigned to the highest priority queue
PPPoE Discovery Mirror Port
1’b0: Disable
1’b1: Frame copied to Mirror port
PPPoE Discovery TO_CPU Forwarding
3’b0xx: System default (disable)
3’b100: System default and CPU port excluded.
3’b101: System default and CPU port included.
3’b110: CPU port only (As long as the ingress
port is not the CPU port. If the ingress port
is the CPU port, then the system default and
CPU port are excluded.)
3’b111: Frame dropped
ARP/RARP as Management Frame
1’b0: Disable
1’b1: Regarded as management frame
ARP/RARP as PAE Frame
1’b0: Disable
1’b1: Regarded as PAE frame
ARP/RARP as BPDU Frame
1’b0: Non-BPDU Frame
1’b1: Regarded as BPDU frame
ARP/RARP Egress VLAN Tag Attribution
3’b000: System Default (Disable)
3’b001: Consistent
3’b010, 3’b011: Reserved
3’b100: Untagged
3’b101: Swap
3’b110: Tagged
3’b111: Stack