mensor CPC6050 User Manual

Operating Instructions - CPC6050 77
Modular Pressure Controller
CPC6050
Calibration_mode YES, NO Enable/ disable the calibration mode,
which when on, disables the sensor
overpressure error and forces range
hold to lock the secondary shuto
valve. Normally the secondary range
is always allowed to go to its maxi-
mum pressure to avoid a large pres-
sure disturbance when switching to it.
Cerr None Clears the error queue
Chan A, B, D or Baro Select the current channel for remote
communication. Does not apply to
single output autorange option. For
single output channel A or B, this
selects the current channel. Channel
Baro should only be set when used
for calibration functionality
Chan? <sp>A,B,D, or BARO<cr><lf> Return the current channel for remote
communication
Cmdset Mensor, DPI510, SCPI Activates remote command set for
instrument emulation modes.
Cmdset? <sp><CCCCCC><cr><lf> Returns active command set identier
Control Instrument placed in Control Mode
Control? <sp>(YES or NO)<cr><lf> Returns YES if instrument is in control.
NO if otherwise
Control_behavior <n> 0 to 100 100 = highspeed, 0 = low overshoot.
May be set between 0 and 100.
Control_behavior? <sp>NNN<cr><lf> Retuns the control behavior number
Control_default PRECISION, HIGHSPEED, CUSTOM
or NONE
Sets the current control settings
Control_default? <sp>(PRECISION, HIGHSPEED,
CUSTOM or NONE)<cr><lf>
Returns the current control settings
Crate Slow, Medium, Fast, Variable Sets the control rate, Variable mode
is a predetermined user dened rate
setpt.
Crate? <sp>CCCCCC<cr><lf> Returns the control rate – CCCC is
variable in length and corresponds to
the parameters for the CRATE com-
mand
Ctype? Returns the type of regulator
Decpt? <sp>n<cr><lf> Returns the number of decimal points
(see Resolution)
Default None Sets the default values
Deltafunc A+B, A-B, B-A Sets the Delta channel’s function
Deltafunc? <sp>{A+B or A-B or B-A}<cr><lf> Returns the Delta channel’s function
DHCP ON or OFF Reserved for DHCP setup
DHCP? <sp>(YES or NO)<cr><lf> Reserved for DHCP setup

mensor CPC6050 Specifications

General

Brand	mensor
Model	CPC6050
Category	Controller
Language	English