mensor CPC6050 User Manual

82 Operating Instructions - CPC6050
Modular Pressure Controller
CPC6050
Purge? <sp>S,T<cr><lf> Returns purge data where S repre-
sents state (0 = complete, 1 = local
purge, 2 = remote purge), T repre-
sents the estimated time to complete
in seconds
Purgeabort? Aborts purge sequence if currently
running. Only applicable with option
PURGE enabled
RangeMax? <sp>n.nnnnnE+nn<cr><lf> Returns the maximum range of the
active transducer in the current units.
RangeMin? <sp>n.nnnnnE+nn<cr><lf> Returns the minimum range of the ac-
tive transducer in the current units.
Rate? <sp>n.nnnnnE+nn<cr><lf> Returns the rate reading of the instru-
ment in current units/current time unit
(see Runits)
Rdecpt? <sp>n<cr><lf> Returns the number of rate decimal
points. (see Resolution)
Reference {EXTVAC or ATM} Sets the reference type for vacuum
pump connected to the reference, or
vented to atmosphere. This option is
available only on native gauge units.
Reference? <sp>{EXTVAC or ATM}<cr><lf> Returns the current reference type.
(see Reference)
Release? 15 char string.
EX:
Release? Test_stand_1
Returns:
<sp>(YES or NO), CCC…
CCC<cr><lf>
This command is used to release
control of the instrument in a multiple
computer environment.
Yes if release is successful
No if instrument is being controlled
with another computer
CCC… = name of controlling com-
puter or AVAILABLE
(see Acquire? and Unlock)
Reset_instrument_
time_on
Resets the instrument’s time on coun-
ter. See usage application for more
details
Reset_instrument_
control_time_on
Resets the instrument’s time on coun-
ter. See usage application for more
details
Resolution <n> Sets the number of signicant digits.
(see decpt)
Resolution? <sp>n<cr><lf> Returns the number of signicant
digits. (see decpt)
Rlter Value in % Sets the % of the rate lter
Rlter? <sp>n.nnnnnE+nn<cr><lf> Returns the rate lter.
Rsetpt Value in current units Sets the rate setpoint
Rsetpt? <sp>n.nnnnnE+nn<cr><lf> Returns the rate setpoint
Runits Sec, min, hr Sets the rate time unit

mensor CPC6050 Specifications

General

Brand	mensor
Model	CPC6050
Category	Controller
Language	English