© Microhard Systems Inc. 134
5.0 AT Commands
AT&V
Command Syntax
Read modem active profile.
AT&V <enter>
Description
Example
Input:
AT&V <enter>
Response:
BASIC_SETTINGS_BEGIN:
#Hardware Version:--Read Only
Hardware_Version=v2.0.0
#Software Version:--Read Only
Software_Version=v1.2.2-r1045c
#Radio Version:--Read Only
Radio_Version=0.
#Radio Description:
Radio_Description=IPn3G
#Date(yyyy-mm-dd):
System_Date=2012-02-01
#Time(hh:mm:ss):
System_Time=10:41:25 <Additional Output Omitted>
To Next Page
Loading...
