Microhard Systems IPN3G - Appendix H: System.conf File Structure

© Microhard Systems Inc. 197
Appendix H: “system.conf” File Structure (1 of 25)
The following pages show an example “system.conf” file exported from a IPn3G running
Software Version v1.2.2-r1045d, file may change as features are added or modified.
BASIC_SETTINGS_BEGIN:
#Hardware Version:--Read Only
Hardware_Version=v2.0.0
#Software Version:--Read Only
Software_Version=v1.2.2-r1045c
#Radio Version:--Read Only
Radio_Version=0.
#Radio Description:
Radio_Description=IPn3G
#Date(yyyy-mm-dd):
System_Date=2012-02-01
#Time(hh:mm:ss):
System_Time=10:41:25
#UTC Time Offset(+/-hh:mm):
System_UTC_Time_Offset=America/Edmonton
#Console Timeout(s):
System_Console_Timeout=0
#Wireless traffic Timeout(s):
System_Traffic_Watchdog_Timer=600
#System Default Button: A - Enable B - Disable
System_Default_Button=A
#System Syslog Server IP:
System_Syslog_Server_IP=0.0.0.0
#System Syslog Server Address:
System_Syslog_Server_Port=514
#NAT: A - Disable B - Enable
PPP_NAT=B
#PPP Status: A - Disable B - Enable
PPP_STATUS=B
#IP-Passthrough: A - Disable B - Ethernet
PPP_IP_Passthrough=A
#Dial-on-Demand: A - Disable B - Enable
PPP_DIAL_ONDEMAND=A
#Idle Timeout(s):
PPP_IDLE_TIME_OUT=0
#Connect Timeout(s):
PPP_CONNECT_TIMEOUT=90