© Microhard Systems Inc. 44
4.0 WebUI Configuration
Image 4-19: Carrier Config
4.4.3 Carrier Configuration
The parameters within the Carrier Configuration menu must be input properly; they are the most basic
requirement required by your cellular provider for network connectivity.
Carriers
This option allows for the automatic detection of available carriers, the
manual selection of detected carriers, or the fixed selection of entering a
carriers ID. Manual and Fixed are commonly used when the IPn3G is
Roaming and it is desirable to control which carrier the unit connects to.
Automatic
Manual
Fixed
Values (selection)
To Next Page
Loading...
