Microhard Systems IPN3G - Appendix I: SNMP MIB File Sample

© Microhard Systems Inc. 222
Appendix I: SNMP MIB IPn3G “Sample” (Page 1 of 15)
The following pages show an example MIB file for the IPn3G. This is not the complete MIB file,
only the first 15 pages of the MIB are shown for reference. Contact Microhard Systems for the
complete and most current release, as the MIB will change as features are added.
—————————————————————————————————————————————————————
MICROHARD-IP3G
-- Title: MICROHARD MIB
-- Date: Feb 15, 2012
-- Version 1.28
-- Disription: Not all parameters are supported in a paticular device,Support of parameters varies
-- from version to version
DEFINITIONS ::= BEGIN
IMPORTS
enterprises, OBJECT-TYPE, NetworkAddress, IpAddress,
Counter, Gauge, TimeTicks
FROM RFC1065-SMI;
-- DisplayString
-- FROM RFC1158-MIB;
Microhard OBJECT IDENTIFIER ::= { enterprises 21703 }
--IP3G
IP3G OBJECT IDENTIFIER ::= { Microhard 5000 }
SystemConfig OBJECT IDENTIFIER ::= { IP3G 1 }
NetworkConfig OBJECT IDENTIFIER ::= { IP3G 2 }
CarrierConfig OBJECT IDENTIFIER ::= { IP3G 3 }
COM1Config OBJECT IDENTIFIER ::= { IP3G 4 }
COM2Config OBJECT IDENTIFIER ::= { IP3G 5 }
SecurityConfig OBJECT IDENTIFIER ::= { IP3G 6 }
SystemInformation OBJECT IDENTIFIER ::= { IP3G 7 }
SystemTools OBJECT IDENTIFIER ::= { IP3G 8 }
USBConfig OBJECT IDENTIFIER ::= { IP3G 9 }
-- SystemConfig parameter group
System_Unit_Description OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "Radio Discription."
::= { SystemConfig 1 }
System_Date OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "System Date."
::= { SystemConfig 2 }
System_Time OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "System Time."
::= { SystemConfig 3 }
System_Timezone OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..32))
ACCESS read-write
STATUS mandatory
DESCRIPTION "System Timezone."
::= { SystemConfig 4 }