© Microhard Systems Inc. 127
4.0 WebUI Configuration
4.11.3 Tools > Diagnostic
The Diagnostic menu provides Ping and Trace Route tools to use to test connectivity of the IPn3G.
Image 4-83: Diagnostic Utilities
A user can use the Ping command by entering the IP address of destination device in the Remote IP
Address, use Count for the number of ping messages to send, and the Packet Size to modify the size of
the packets sent.
The Trace Route command can also be used to provide connectivity data by providing information about
the number of hops, routers and the path taken to reach a particular destination.
To Next Page
Loading...
