Microhard Systems IPN3G - Dial Number; Static Ip Address

© Microhard Systems Inc. 47
4.0 WebUI Configuration
Connect String
Sets the modems connect string if required by the carrier.
CONNECT
Values (String)
Initialization 1 - 4
The modem can have up to 4 initialization strings.
Init-string
Values (String)
Use Remote DNS
Enabled by default, the IPn3G, will use the DNS server as specified
automatically by the service provider.
Disable / Enable
Values (Selection)
Image 4-20: Carrier Configuration Menu, DDNS Config...
Password
Password as required for authentication to remote peer. May not be
required for dynamically assigned IP addresses from the wireless carrier.
Usually required for static IP addresses.
Carrier/peer dependant
Values (char string)
Dial Number
Sets the number to be dialed. Carrier dependant, the default number is
*99***1#
*99***1#
Values (String)
Static IP Address
In some cases the Static IP address must be entered in this field if
assigned by a wireless carrier. In most cases the IP will be read from the
SIM card and this field should be left at the default value.
0.0.0.0
Values