Microhard Systems IPN3G - Modbus; TCP Modbus

© Microhard Systems Inc. 109
4.0 WebUI Configuration
4.10.8 Advanced > Modbus
4.10.8.1 Modbus > TCP Modbus
The IPn3G can be configured to operate as a TCP/IP or Serial (COM) Modbus slave and respond to
Modbus requests and report various information as shown in the Data Map.
Image 4-68: Advanced > Modbus TCP Setup
Modbus Slave Status
Values (selection)
Modbus TCP Enable
Enable or disable TCP Modbus on the IPn3G.
Values (selection)
Disable
Enable Modbus TCP Mode
Disable or enable TCP and Serial Modbus services on the IPn3G.
Disable
Enable