© Microhard Systems Inc. 90
4.0 WebUI Configuration
4.10.1.3 VPN > L2TP Client
The IPn3G can also operate as a L2TP Client, allowing a VPN connection to be made with a L2TP Server.
Image 4-50: VPN IPsec, VPN Client Submenu
Add New Connection > Connection Name
The Connection Name is used as a reference name for easy identification
of the connection.
Values (characters)
none
Add New Connection > Tunnel Status
Enable or disable the connection to the specified L2TP server here.
Values (selection)
Disable / Enable
Add New Connection > Authentication
Select the type of Authentication. If Preshared Key is used, the same key
must be entered under IPsec Setup > Preshared Key. If X.509 is selected,
Certificate Management (Security) must be used to load the required
certificates and private keys related to X.509
Values (selection)
Preshared Key
X.509 CA
To Next Page
Loading...
