© Microhard Systems Inc. 198
Appendix H: “system.conf” File Structure (2 of 25)
#Dialing Max Retries:
PPP_DIALING_MAX_RETRY=0
#Authentication Type: A - NoAuth B - chap C - pap D - pap-chap
PPP_AUTH_TYPE=B
#User Name:
PPP_USERNAME=
#Password:
PPP_PASSWORD=
#SIM Pin:
PPP_SIM_PIN=
#Dial Number:
PPP_DIAL_NUM=*99***1#
#Connect String:
PPP_CONN_STR=CONNECT
#Access Point Name(APN):
PPP_Acess_Point_Name=staticip.apn
#Carriers: A - Automatic B - Manual
PPP_Carriers=A
#Carrier ID:
PPP_Carrier_Manal_ID=0
#Initialization 1:
PPP_INIT_STR1=
#Initialization 2:
PPP_INIT_STR2=
#Initialization 3:
PPP_INIT_STR3=
#Initialization 4:
PPP_INIT_STR4=
#Static IP Addr:
PPP_Static_IP=0.0.0.0
#Use Remote DNS: A - Disable B - Enable
PPP_Use_Remote_IP=B
#Port Status: A - Disable B - Enable
COM1_Port_Status=B
#Channel Mode: A - RS232 B - RS485 C - RS422
COM1_Chanel_Mode=A
#Data Baud Rate: A - 300 B - 600 C - 1200 D - 2400
# E - 3600 F - 4800 G - 7200 H - 9600 I - 14400 J - 19200
# K - 28800 L - 38400 M - 57600 N - 115200 O - 230400
# P - 460800 Q - 921600
COM1_Data_Baud_Rate=H
#Data Format: A - 8N1 B - 8N2 C - 8E1 D - 8O1 E - 7N1
# F - 7N2 G - 7E1 H - 7O1 I - 7E2 J - 7O2
COM1_Data_Format=A
To Next Page
Loading...
