Microhard Systems IPN3G - Page 199

© Microhard Systems Inc. 199
Appendix H: “system.conf” File Structure (3 of 25)
#Flow Control: A - None B - Hardware C - CTS Framing
COM1_Flow_Control=A
#Pre-Data Delay(ms):
COM1_Pre_Data_Delay=100
#Post-Data Delay(ms):
COM1_Post_Data_Delay=100
#Data Mode: A - Seamless B - Transparent
COM1_Data_Mode=B
#Character Timeout:
COM1_Character_Timeout=0
#Maximum Packet Size:
COM1_Max_Packet_Len=1024
#Priority: A - Normal B - Medium C - High
COM1_QoS=A
#No-Connection Data Intake: A - Disable B - Enable
COM1_NoConnect_Data_Intake=B
#Protocol Config A - TCP Client B - TCP Server C - TCP Client/Server
# D - UDP Point to Point E - UDP Point to Multipoint(P)
# F - UDP Point to Multipoint(MP) G - UDP Multipoint to Multipoint
# H - SMTP Client I - PPP J - SMS Transparent Mode
# K - SMS AT Mode
COM1_IP_Protocol=F
#Port Status: A - Disable B - Enable
COM2_Port_Status=A
#Data Baud Rate: A - 300 B - 600 C - 1200 D - 2400
# E - 3600 F - 4800 G - 7200 H - 9600 I - 14400 J - 19200
# K - 28800 L - 38400 M - 57600 N - 115200
COM2_Data_Baud_Rate=N
#Data Format: A - 8N1 B - 8N2 C - 8E1 D - 8O1 E - 7N1
# F - 7N2 G - 7E1 H - 7O1 I - 7E2 J - 7O2
COM2_Data_Format=A
#Data Mode: A - Seamless B - Transparent
COM2_Data_Mode=B
#Character Timeout:
COM2_Character_Timeout=0
#Maximum Packet Size:
COM2_Max_Packet_Len=1024
#Priority: A - Normal B - Medium C - High
COM2_QoS=A
#No-Connection Data Intake: A - Disable B - Enable
COM2_NoConnect_Data_Intake=B
#Protocol Config A - TCP Client B - TCP Server C - TCP Client/Server
# D - UDP Point to Point E - UDP Point to Multipoint(P)
# F - UDP Point to Multipoint(MP) G - UDP Multipoint to Multipoint
COM2_IP_Protocol=F
#USB Device Port Mode: A - Console Mode B - Data Mode
# C - NDIS Mode
USB_Device_Mode=C