Microhard Systems IPN3G - Page 167

© Microhard Systems Inc. 167
5.0 AT Commands
AT+MCTMPS
Command Syntax
Set COM2 data format
AT+MCTMPS=<size>
Description
Example
Input:
AT+MCTMPS=1024<enter>
Response:
OK
AT+MCTP
Command Syntax
Set COM2 port priority.
AT+MCTP=<Mode>
Mode:
0 Normal
1 Medium
2 High
Description
Example
Input:
AT+MCTP=0<enter>
Response:
OK
AT+MCTNCDI
Command Syntax
Enable/Disable COM2 port no-connection data
intake.
AT+MCTNCDI=<Mode>
Mode:
0 Disable
1 Enable
Description
Example
Input:
AT+MCTNCDI=1<enter>
Response:
OK
The AT&W command
must be issued to save
changes!