Microhard Systems IPN3G - Page 202

© Microhard Systems Inc. 202
Appendix H: “system.conf” File Structure (6 of 25)
#VLAN Status: A - Disable B - Enable
VLAN_Status=A
#Management VLAN (VLAN ID):
Management_VLAN_ID=1
#Mesh Status: A - Disable B - Enable
Mesh_L2_Status=A
#Keep Alive Check: A - Disable B - Enable
Radio_KeepAlive_Status=B
#HostName:
Radio_KeepAlive_HostName=www.google.com
#Interval(s):
Radio_KeepAlive_Interval=600
#Count:
Radio_KeepAlive_Count=10
#Wakeup On Call: A - Disable B - Enable
Radio_WakeOnCall_Status=A
#Time Delay(s):
Radio_WakeOnCall_TimeDelay=10
#Dial On Demand From LAN: A - Disable B - Enable
Radio_WakeOnCall_From_LAN=B
#Initialization 1:
Radio_WakeOnCall_InitStr1=
#Initialization 2:
Radio_WakeOnCall_InitStr2=
#Initialization 3:
Radio_WakeOnCall_InitStr3=
#Initialization 4:
Radio_WakeOnCall_InitStr4=
#Caller IDs:
Radio_Static_IP_Addr=
#Caller Acknowledgement:
Radio_WakeOnCall_CallerID=
Radio_WakeOnCall_CallerAck=
#PowerOn Init String:
Radio_PowerOn_InitStr=
#Remote Server IP Address:
COM1_T_Client_Server_Addr=0.0.0.0
#Remote Server Port:
COM1_T_Client_Server_Port=20001
#Outgoing Connection Timeout:
COM1_T_Client_Timeout=60
#TCP Server Polling Mode: A - Monitor B - Multi-polling
COM1_T_Server_Polling_Mode=A
#Multi-polling Timeout(ms):
COM1_T_Server_Polling_Timeout=100