© Microhard Systems Inc. 206
Appendix H: “system.conf” File Structure (10 of 25)
#RADIUS Timeout:
AUTH_Server_Reply_Timeout=10
#Firewall Status: A - Disable B - Enable
Firewall_Status=A
#Source Zone: A - WAN B - LAN C - FW D - VPN E - all
FW_Policy_Source_Zone=A
#Destination Zone: A - WAN B - LAN C - FW D - VPN E - all
FW_Policy_Destination_Zone=A
#Policy: A - ACCEPT B - DROP C - REJECT D - QUEUE E - CONTINUE
# F - NONE
FW_Policy_Policy=A
#Log: A - No B - Emergancy C - Alert D - Critical E - Error
# F - Warning G - Notice H - Information I - Debug
FW_Policy_Log=A
#Select Policy Number:
FW_Policy_Number=0
#Action: A - ACCEPT B - ACCEPT+ C - NONAT D - DROP
# E - REJECT F - DNAT G - SAME H - REDIRECT I - CONTINUE
# J - LOG K - QUEUE
FW_Rule_Action=A
#Source Zone: A - WAN B - LAN C - FW D - VPN E - all
FW_Rule_Source_Zone=A
#Source IP:
FW_Rule_Source_IP=0.0.0.0
#Destination Zone: A - WAN B - LAN C - FW D - VPN E - all
FW_Rule_Destination_Zone=A
#Select Service: A - Custom Service
FW_Rule_Select_Service=0
#Destination IP:
FW_Rule_Destination_IP=0.0.0.0
#Destination Port
FW_Rule_Destination_Port=0
#Protocol: A - TCP B - TCP:SYN C - UDP D - ICMP E - IPP2P
# F - IPP2P:UDP G - IPP2P:all H - All
FW_Rule_Protocol=A
#Comment:
FW_Rule_Name=Rule 1
#Select Rule Number:
FW_Rule_Number=0
#Internal Server IP:
FW_Portfw_Server_IP=192.168.2.5
#Internal Port:
FW_Portfw_Internal_Port=0
#Protocol: A - TCP B - TCP:SYN C - UDP D - ICMP E - IPP2P
# F - IPP2P:UDP G - IPP2P:all H - All
FW_Portfw_Protocol=A
To Next Page
Loading...
