Microhard Systems IPN3G - Page 217

© Microhard Systems Inc. 217
Appendix H: “system.conf” File Structure (21 of 25)
#Supply Voltage
VOLTAGE_CHECK=A
#High Threshold(V):
VOLTAGE_HIGH=36
#Low Threshold(V):
VOLTAGE_LOW=7
#Home/Roaming Status
ROAMING_CHECK=A
ROAMING_STATUS=Roaming
#Ethernet Link Status
ETH_CHECK=A
ETH_LINK_STATUS=0
#Phone Number:
SAL_Phone1=
#Phone Number:
SAL_Phone2=
#Phone Number:
SAL_Phone3=
#Phone Number:
SAL_Phone4=
#Phone Number:
SAL_Phone5=
#Phone Number:
SAL_Phone6=
#Interval(s):
SAL_Interval=5
#Report# A - Disable B - Enable
Netflow_Reporting_Status=AAAA
#Interface: A - LAN B - WAN C - ALL
Netflow_Remote_IF0=A
#Interface: A - LAN B - WAN C - ALL
Netflow_Remote_IF1=A
#Interface: A - LAN B - WAN C - ALL
Netflow_Remote_IF2=A
#Interface: A - LAN B - WAN C - ALL
Netflow_Remote_IF3=A
#Remote IP:
Netflow_Remote_IP0=0.0.0.0
#Remote IP:
Netflow_Remote_IP1=0.0.0.0
#Remote IP:
Netflow_Remote_IP2=0.0.0.0
#Remote IP:
Netflow_Remote_IP3=0.0.0.0