Microhard Systems IPN3G - Page 71

© Microhard Systems Inc. 71
4.0 WebUI Configuration
RADIUS Server Port
In this field, the applicable Port number for the RADIUS Server is to be
entered if RADIUS&Local has been selected as the Authorization Mode.
Normally, a RADIUS Server uses Port 1812 for the authentication function.
Values
Applicable RADIUS Server
Port number
1812
RADIUS Secret
If the IP Series’ Authorization Mode has been set to RADIUS&Local, obtain
the RADIUS Secret for his particular client from your RADIUS Server
Administrator and enter it into this field, and the following field. (You will
also want to obtain the applicable RADIUS User Name from your RADIUS
Server Administrator.)
Values
Specific RADIUS Server
secret
nosecret
Repeat RADIUS Secret
See above. Re-enter RADIUS Secret in this field.
Values
Specific RADIUS Server
secret
nosecret
RADIUS Timeout
Amount of time to wait for RADIUS authentication.
Values
10
1-65535
seconds