Micromeritics TriStar II 3020 - Sample Tube Files

Sample Tube Files TriStar II 3020
5-10 302-42828-01 - Dec 2012
Sample Tube Files
File > Open > Sample Tube (or click the Sample Tube tab when in Advanced format)
The Sample Tube tab provides details for setting up the default settings for a Sample Tube parameter
file.
Close button
Preview button
Save button
Refer to Common Fields and Buttons - File Menu Options, page 5-1.
Field or Button Description
Sample Tube text box Contains the description of the current file.
Replace button Refer to Common Fields and Buttons - File Menu Options, page 5-1.
Blank Tube Properties

group box
For calculated free space, enter the values for the following or use the
Load from Sample File button to import this information from an existing
sample information file:
• Warm free space - sample tube gas capacity measured at room
temperature.
• Cold free space - sample tube gas capacity measured with the Dewar
raised.
• Non-ideality factor - factor used to compensate for the forces of
attraction between molecules in a real gas. This value is used for a
calculated free space.
Field or Button Description (continued)