Specifying Sample Defaults TriStar II 3020
3-2 302-42828-01 - Dec 2012
Advanced Format
The values specified in the parameter portions of the default sample file (Sample Tube, Degas Condi-
tions, Analysis Conditions, Adsorptive Properties, and Report Options) are saved as the defaults for
new sample files. To navigate from one set of parameters to another, click the parameter tab at the top
of the window.
Perform the following steps to establish defaults for a sample information file in the Advanced format.
1. Go to Options > Sample Default
s.
2. In the Sequence Number alpha/numeric text box, specify a default file name string. The
Sequence Number field must contain a minimum of three (3) numbers. This number is
incrementally sequenced and displays in the File name text box in the File > Open > Sample
Information window.
3. The text box to the right of the Sample field is used to enter a format for the sample identification.
Include the $ symbol to automatically include the Sequence Number field text as part of the
sample identification.
To Next Page
Loading...
