TriStar II 3020 Appendix D
302-42828-01 - Dec 2012 D-1
D. ETHERNET CONFIGURATION
This section contains instructions for configuring an Ethernet port in either Microsoft
®
Windows 7 or
Windows Vista. The instructions do not apply to any other operating system.
Configuring the Ethernet Port
The computer and analyzer communicate by means of an Ethernet connection. This appendix contains
instructions for ensuring that the Ethernet connection operates properly.
Windows 7
1. Select the Windows icon from the Status bar at the bottom of the screen, then select Control
Panel.
2. Click Network and Internet.
Windows 7 Professional is recommended for the best user experience.
The windows in this section are Microsoft operating system windows, which may
be subject to change. The windows are included for reference purposes only.
Methods to access to these windows may vary. Refer to the Windows help system
for assistance, if necessary.
To Next Page
Loading...
