Common Fields and Buttons - Reports Menu Options TriStar II 3020
7-2 302-42828-01 - Dec 2012
Common Fields and Buttons - Reports Menu Options
The following fields and buttons are common to many of the report files. References are made to these
fields and buttons throughout this chapter.
Start Report
Reports > Start Report > [file] (or use the F8 keyboard shortcut)
Use to generate a report on a sample analysis.
Field or Button Description
Browse button Click to locate another file.
Cancel button Closes the window and cancels any unsaved changes.
Destination
group box
Refer to Report After Analysis in Sample Analysis, page 6-2.
File name text box Select the file to print (or open) from the Name column. The file name will
appear in the File name text box. Click Open or double-click the file name
in the Name column to open the file. Multiple files can be selected by
holding down the Ctrl key on the keyboard while selecting multiple files.
From / To text boxes Enter the From and To range for autoscaling the X- and/or Y-axes.
Name column Displays a list of files in the selected directory.
OK button Click to save and close the active window.
Open button Click to open the selected file (or double-click the file name in the Name
column to open the file).
Report button Click to generate the report.
Save button Saves the active file.
Show graphic
checkbox and text box
Select to show a graphic on the report header. Click the Browse button to
locate the graphic in either .BMP or .EMF format.
• Height / Width - enter the height and width of the selected graphic.
These values determine the graphic appearance on the generated report.
To Next Page
Loading...
