TriStar II 3020 Report Options Files
302-42828-01 - Dec 2012 5-35
Freundlich Report Options
The Freundlich Isotherm is an empirical isotherm used to model low-pressure adsorption data. It can
also be applied to model some micropore isotherms. In the Selected Reports list box, highlight
Freundlich, then click Edit.
Field or Button Description
Specify monolayer
capacity checkbox
Select and enter the monolayer capacity of the sample.
Absolute pressure
range text boxes
Enter a pressure range when calculation assignments are not used.
Tabular Report
checkbox
Overlay Samples
checkbox
Refer to BET/Langmuir Surface Area Report Options, page 5-32.
Transform plot
checkbox
Plots the log(P) vs log(Q) in a straight line.
• X-axis - The X-axis field shows the absolute pressure.
• Y-axis - The Y-axis field shows the quantity of gas adsorbed.
To Next Page
Loading...
